Few my realized and future DIY projects

Hoparlörler » Hoparlör, kablo, binding post, RCA vs. konuları..

Few my realized and future DIY projects

Okunmamış iletigönderen jororaitchev » 15 Şub 2017, 01:06

Hello,
the first project of my DIY loudspeakers i have served Ti6k- JBL. My first contact with
them, was in distant 2005.
I started working with them in 2009 and finished in 2012.
The loudspeakers are "SEAS"- Excel / Tw-1”, Mw-5”for center 2х 5.5”,Bass-8,5”/ and cross-over parts- "Intertechnik".
Have are some pictures, if there is interest, i will continue.
Regards!
https://goo.gl/photos/QiQ8RKq1N8HYJ7a86
Kullanıcı avatarı
jororaitchev
Yeni Üye
 
İleti: 26
Kayıt: 14 Şub 2017, 23:10
İl: Sofia
Meslek: elektrik mühendisi


Ynt: Few my realized and future DIY projects

Okunmamış iletigönderen chf » 15 Şub 2017, 17:30

jororaitchev yazdı:Hello,
the first project of my DIY loudspeakers i have served Ti6k- JBL. My first contact with
them, was in distant 2005.
I started working with them in 2009 and finished in 2012.
The loudspeakers are "SEAS"- Excel / Tw-1”, Mw-5”for center 2х 5.5”,Bass-8,5”/ and cross-over parts- "Intertechnik".
Have are some pictures, if there is interest, i will continue.
Regards!
https://goo.gl/photos/QiQ8RKq1N8HYJ7a86


My English is limited…Welcome to the Forum…Nice work… Quality equipment...SEAS EXCEL TW1…ACHIEVEMENTS…
chf
DIY Audio Gurusu
 
İleti: 440
Kayıt: 26 Haz 2013, 14:25
İl: izmir

Ynt: Few my realized and future DIY projects

Okunmamış iletigönderen jororaitchev » 15 Şub 2017, 19:41

chf yazdı:
jororaitchev yazdı:Hello,
the first project of my DIY loudspeakers i have served Ti6k- JBL. My first contact with
them, was in distant 2005.
I started working with them in 2009 and finished in 2012.
The loudspeakers are "SEAS"- Excel / Tw-1”, Mw-5”for center 2х 5.5”,Bass-8,5”/ and cross-over parts- "Intertechnik".
Have are some pictures, if there is interest, i will continue.
Regards!
https://goo.gl/photos/QiQ8RKq1N8HYJ7a86


My English is limited…Welcome to the Forum…Nice work… Quality equipment...SEAS EXCEL TW1…ACHIEVEMENTS…

Thanks!
English is not a problem, the work is important.
Kullanıcı avatarı
jororaitchev
Yeni Üye
 
İleti: 26
Kayıt: 14 Şub 2017, 23:10
İl: Sofia
Meslek: elektrik mühendisi

Ynt: Few my realized and future DIY projects

Okunmamış iletigönderen chf » 15 Şub 2017, 20:48

How to use frequency graphic...Frequency response...dynamic??
chf
DIY Audio Gurusu
 
İleti: 440
Kayıt: 26 Haz 2013, 14:25
İl: izmir

Ynt: Few my realized and future DIY projects

Okunmamış iletigönderen jororaitchev » 15 Şub 2017, 21:38

chf yazdı:How to use frequency graphic...Frequency response...dynamic??


Nominal impedance- 8 Ohm
Freguency Range 30Hz-20kHz
Characterstic Sensitivity(2,83V/1m)- 87db
Long Term-110W


Unfortunately no graphics and measurements - was many years ago but
for my new project will have everything.
These speakers have their new owner.
Kullanıcı avatarı
jororaitchev
Yeni Üye
 
İleti: 26
Kayıt: 14 Şub 2017, 23:10
İl: Sofia
Meslek: elektrik mühendisi

Ynt: Few my realized and future DIY projects

Okunmamış iletigönderen chf » 15 Şub 2017, 22:15

Good frequency range...Propagation angle can be examined...(With the possibilities available)
chf
DIY Audio Gurusu
 
İleti: 440
Kayıt: 26 Haz 2013, 14:25
İl: izmir

Reklamlar

Ynt: Few my realized and future DIY projects

Okunmamış iletigönderen devirsefa » 16 Şub 2017, 03:11

jororaitchev yazdı:Hello,
the first project of my DIY loudspeakers i have served Ti6k- JBL. My first contact with
them, was in distant 2005.
I started working with them in 2009 and finished in 2012.
The loudspeakers are "SEAS"- Excel / Tw-1”, Mw-5”for center 2х 5.5”,Bass-8,5”/ and cross-over parts- "Intertechnik".
Have are some pictures, if there is interest, i will continue.
Regards!
https://goo.gl/photos/QiQ8RKq1N8HYJ7a86

Your cabinets are excellent.
I have been interested in SEAS drivers for a few years. Did you like them?
And, is the design sealed box?
Regards,
devirsefa
DIY Audio Fanatiği
 
İleti: 109
Kayıt: 31 Ağu 2014, 17:03
İl: İstanbul

Ynt: Few my realized and future DIY projects

Okunmamış iletigönderen jororaitchev » 16 Şub 2017, 10:36

devirsefa yazdı:
jororaitchev yazdı:Hello,
the first project of my DIY loudspeakers i have served Ti6k- JBL. My first contact with
them, was in distant 2005.
I started working with them in 2009 and finished in 2012.
The loudspeakers are "SEAS"- Excel / Tw-1”, Mw-5”for center 2х 5.5”,Bass-8,5”/ and cross-over parts- "Intertechnik".
Have are some pictures, if there is interest, i will continue.
Regards!
https://goo.gl/photos/QiQ8RKq1N8HYJ7a86

Your cabinets are excellent.
I have been interested in SEAS drivers for a few years. I have been interested in SEAS drivers for a few years
And, is the design sealed box?
Regards,


Thanks for rating!
Yes, like "SEAS", their specificity of sound and vision - not like the price!
TW 25 CF0025 can be a lot better in technical ratio but .. it is my a " blind love".
The desgn is'nt sealed box / look picture N-13/.
Joro
Kullanıcı avatarı
jororaitchev
Yeni Üye
 
İleti: 26
Kayıt: 14 Şub 2017, 23:10
İl: Sofia
Meslek: elektrik mühendisi

Ynt: Few my realized and future DIY projects

Okunmamış iletigönderen jororaitchev » 17 Şub 2017, 16:48

For friday evening!
Friday night is, I want to shake her as present to you my new project / early stage /;
Joro

https://jororaitchev.blogspot.bg/2017/0 ... ect-j.html
Kullanıcı avatarı
jororaitchev
Yeni Üye
 
İleti: 26
Kayıt: 14 Şub 2017, 23:10
İl: Sofia
Meslek: elektrik mühendisi

Ynt: Few my realized and future DIY projects

Okunmamış iletigönderen chf » 17 Şub 2017, 17:25

jororaitchev yazdı:For friday evening!
Friday night is, I want to shake her as present to you my new project / early stage /;
Joro

https://jororaitchev.blogspot.bg/2017/0 ... ect-j.html


No vibration in the speaker box...Minimum resonance... :) ;) Original...Happy work for you..
chf
DIY Audio Gurusu
 
İleti: 440
Kayıt: 26 Haz 2013, 14:25
İl: izmir

Sonraki

Hoparlörler


Kimler çevrimiçi

Bu forumu görüntüleyenler: Google [Bot] ve 0 misafir